When the clock stops lighting up, it can be annoying. So we will have to change the display bulb of this Suzuki Swift 3. Even if the dashboard remains functional, several pieces of information are missing in order to circulate in sufficient comfort. This manipulation is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remember the reverse process, especially concerning the connectors. To complete this task, allow approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Suzuki-Swift-3

How to change the bulb on the Suzuki Swift 3 display

Depending on the years of circulation, the methodology may vary slightly. It is conceivable that some covers or screws are not identical. We therefore suggest the procedure to follow in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
  • Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of your Suzuki Swift 3. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also naturally.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered particular concerns.