When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of this Suzuki Swift 4. Although the dashboard remains functional, certain information is missing in order to circulate in good conditions. This manipulation is not complex to execute, but requires a minimum of rigor. We also advise you to take photos at certain stages in order to remember the reverse process, especially for connectors. To perform this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to replace this bulb, point by point.
How to change the bulb on the Suzuki Swift 4 display
Depending on the release year, the procedure may vary a little. It is conceivable that several covers or screws are not identical. So that's the general approach.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to take off some screws. Therefore, keep them preciously aside.
- Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of your Suzuki Swift 4. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can access the defective bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension also obviously.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered specific problems.