When the clock stops working, it can get annoying. We will therefore have to replace the display bulb of this Suzuki Sx4. Although the dashboard remains functional, we are missing several information to circulate in good conditions. This action is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at certain stages to remind you of the reverse manipulation, especially for the connectors. To complete this task, allow about a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's take a look at how to replace this bulb step by step.
How to change the display bulb of the Suzuki Sx4
Depending on the years of production, the methodology may vary a little. It remains conceivable that some covers or screws are not identical. This is therefore the logic to be followed in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. Sometimes you have to remove a few screws. In this situation, keep them preciously aside.
- Once the front is completely removed, you need disconnect connectors connected to the clock bulb of the Suzuki Sx4. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also obviously.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific problems.