When the clock stops working, it can get annoying. So we will have to change the display bulb Suzuki Vitara 2. Although the dashboard remains functional, we are missing some information in order to circulate in good conditions. This action is not difficult to perform, but requires a minimum of thoroughness. It is also advisable to take pictures at certain stages in order to remind yourself of the reverse manipulation, especially concerning the connectors. To complete this task, allow about a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Suzuki-Vitara-2

How to change the bulb on the Suzuki Vitara 2 display

Depending on the release dates, the procedure may vary a little. It remains conceivable that some covers or screws differ. We therefore suggest the procedure to follow in general.

  • Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of the Suzuki Vitara 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if necessary.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also of course.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered particular malfunctions.