When the clock runs out of light, it can be annoying. So you have to replace the display bulb of the Suzuki Vitara. Although the dashboard remains functional, we are missing certain information in order to circulate in good conditions. This manipulation is not hard to execute, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages in order to remind you of the reverse manipulation, in particular concerning the connectors. To execute this manipulation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb, step by step.
How to change the bulb on the Suzuki Vitara display
Depending on the release dates, the methodology may vary a little. It remains likely that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of your Suzuki Vitara. You will therefore be able to dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
- Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also obviously.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered specific problems.