When the clock stops working, it can be annoying. So you have to replace the display bulb of this Suzuki Wagon R +. Even if the dashboard is still operational, we lack several information to drive in sufficient comfort. This manipulation is not hard to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages to remind you of the reverse manipulation, especially regarding connectors. To carry out this task, plan around a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's look at how to replace this bulb, point by point.
How to change the bulb on the Suzuki Wagon R + display
Depending on the release dates, the method may vary slightly. It is likely that some covers or screws differ. We therefore offer you the logic to follow in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of your Suzuki Wagon R +. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage as well of course.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific problems.