When the clock stops working, it can get annoying. So you have to change the display bulb of this Suzuki X90. Even if the dashboard remains operational, some information is missing to drive comfortably. This action is not hard to execute, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages to remember the reverse process, especially regarding connectors. To perform this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to change this bulb, step by step.
How to change the bulb on the Suzuki X90 display
Depending on the release dates, the methodology may vary slightly. Some covers or screws may not be the same. This is the logic to follow in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of this Suzuki X90. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- You can normally have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also obviously.
- Place the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave us a comment if you have encountered any particular concerns.