When the clock doesn't light up, it can be unpleasant. So you need to replace the display bulb of the Toyota 2000 Gt Mf 10. Even if the dashboard remains functional, some information is missing in order to circulate comfortably. This operation is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at different stages in order to remember the reverse process, especially for the connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.
How to change the display bulb of the Toyota 2000 Gt Mf 10
Depending on the years of release, the methodology may vary a little. It is likely that several covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of the Toyota 2000 Gt Mf 10. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally have access to the damaged bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also naturally.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular concerns.