When the clock doesn't work, it can be unpleasant. We will therefore have to replace the display bulb of the Toyota 2000 Gt Mf 12. Even if the dashboard remains functional, we lack some information to drive in sufficient comfort. This manipulation is not complex to perform, but requires a minimum of rigor. It is advisable to take pictures at different stages to remember the reverse manipulation, especially concerning the connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Toyota-2000-Gt-Mf-12

How to change the display bulb of the Toyota 2000 Gt Mf 12

Depending on the year of release, the procedure may vary a little. It is likely that a few covers or screws differ. This is therefore the general approach to be followed.

  • Start with remove the covers of the front panel which hinder access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this situation, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of the Toyota 2000 Gt Mf 12. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can have access to the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.