When the clock stops lighting up, it can get annoying. So you have to replace the display bulb of the Toyota 4runner. Even if the dashboard remains functional, it lacks several indications in order to circulate in good conditions. This action is not hard to perform, but requires a minimum of rigor. We advise you to take pictures at certain stages in order to remind you of the reverse process, especially concerning the connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to replace this bulb, step by step.change-bulb-clock-Toyota-4runner

How to change the display bulb of the Toyota 4runner

Depending on the years of circulation, the method may vary slightly. It is still possible that some covers or screws are not identical. Here is the general procedure to follow.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove some screws. In this case, keep them carefully aside.
  • Once the cover is completely removed, you need disconnect connectors which connect to the clock bulb of this Toyota 4runner. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
  • You can normally have access to the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also obviously.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered particular concerns.