When the clock stops working, it can be annoying. So you have to replace the display bulb of the Toyota Auris 2 Tourings. Even if the dashboard remains functional, we lack certain indications to drive in good conditions. This manipulation is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages to remind you of the reverse manipulation, especially for the connectors. To complete this task, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.
How to change the display bulb of the Toyota Auris 2 Tourings
Depending on the release dates, the methodology may vary a bit. It is likely that some covers or screws differ. This is the logic to follow in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this Toyota Auris 2 Tourings. You will be able to remove all of the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- Normally you can access the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also naturally.
- Place the new bulb by checking that it is located at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered particular malfunctions.