When the clock stops working, it can be annoying. It will therefore be necessary to replace the display bulb Toyota Auris 2. Although the instrument panel remains operational, it lacks certain indications to drive in sufficient comfort. This operation is not hard to perform, but requires a minimum of rigor. We advise you to take pictures at different stages to remind yourself of the reverse process, especially concerning the connectors. To complete this task, allow roughly a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Auris-2

How to change the display bulb of the Toyota Auris 2

Depending on the years of circulation, the procedure may vary slightly. It is conceivable that several covers or screws are not identical. We therefore offer you the logic to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Toyota Auris 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
  • You can normally access the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also obviously.
  • Place the new bulb making sure it sits well at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.