When the clock stops working, it can get annoying. So you have to change the display bulb of the Toyota Avensis 2. Even if the dashboard remains functional, it lacks some indications to drive in sufficient comfort. This manipulation is not complex to perform, but requires a minimum of rigor. We advise you to take pictures at different stages to remember the reverse process, especially for the connectors. To perform this task, count roughly a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Toyota-Avensis-2

How to change the bulb on the Toyota Avensis 2 display

Depending on the year of release, the methodology may vary slightly. It is possible that several covers or screws differ. We therefore offer you the logic to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this Toyota Avensis 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
  • You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered specific problems.