When the clock runs out of light, it can get annoying. So you have to replace the display bulb Toyota Avensis 3. Even if the dashboard remains functional, we lack some indications to drive in good conditions. This operation is not difficult to achieve, but requires a minimum of thoroughness. It is also advisable to take pictures at different stages to remind you of the reverse manipulation, especially concerning the connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the Toyota Avensis 3 display
Depending on the release dates, the procedure may vary slightly. It remains possible that some covers or screws are not identical. So that's the general approach to follow.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. Therefore, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors which connect to the clock bulb of this Toyota Avensis 3. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- You can normally access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage also of course.
- Place the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
You can leave a comment if you have encountered specific malfunctions.