When the clock stops working, it can get annoying. It will therefore be necessary to replace the display bulb of this Toyota Avensis 4. Even if the dashboard is still functional, it lacks some information to circulate in good conditions. This action is not difficult to execute, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages to remember the reverse process, especially regarding connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Toyota Avensis 4 display
Depending on the release dates, the procedure may vary slightly. It remains conceivable that some covers or screws are not identical. This is therefore the logic to be followed in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of the Toyota Avensis 4. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
- You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also naturally.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave a comment if you have encountered specific problems.