When the clock doesn't light up any more, it can be annoying. It will therefore have to change the display bulb of the Toyota Avensis Verso. Although the dashboard remains operational, some information is missing to circulate in sufficient comfort. This operation is not hard to perform, but requires a minimum of rigor. We also advise you to take photos at certain stages to remind you of the reverse manipulation, especially regarding connectors. To execute this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to change this bulb, point by point.change-bulb-clock-Toyota-Avensis-Verso

How to change the bulb on the Toyota Avensis Verso display

Depending on the production dates, the methodology may vary a little. It is likely that several covers or screws differ. We therefore propose the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
  • Once the facade is completely dismantled, you must disconnect connectors connected to the clock bulb of the Toyota Avensis Verso. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also naturally.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Please do not hesitate to leave us a comment if you have encountered specific concerns.