When the clock runs out of light, it can get unpleasant. So we will have to change the display bulb of this Toyota Avensis. Although the dashboard remains operational, we are missing several pieces of information in order to drive in good conditions. This operation is not difficult to perform, but requires a minimum of rigor. We also advise you to take photos at different stages in order to remember the reverse process, especially regarding connectors. To do this, count roughly a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to replace this bulb, point by point.change-bulb-clock-Toyota-Avensis

How to change the bulb on the Toyota Avensis display

Depending on the years of production, the methodology may vary a little. It is still possible that some covers or screws differ. So that's the general approach to follow.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of your Toyota Avensis. You can therefore remove all the connectors from the block, as long as you remember the location. Help yourself with your camera if it helps you.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage as well of course.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered particular concerns.