When the clock runs out of light, it can be annoying. So you have to change the display bulb of the Toyota Aygo 2. Although the dashboard is still functional, it lacks several pieces of information to drive in sufficient comfort. This operation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages to remember the reverse manipulation, especially for the connectors. To complete this task, approximately count a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Aygo-2

How to change the display bulb of the Toyota Aygo 2

Depending on the production dates, the procedure may vary slightly. It is likely that several covers or screws are not identical. We thus offer you the logic to follow in general.

  • Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove some screws. Therefore, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of the Toyota Aygo 2. You will be able to remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension also naturally.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered specific malfunctions.