When the clock runs out of light, it can be annoying. So you have to replace the display bulb of this Toyota Camry 2. Although the dashboard is still functional, it lacks some indications in order to circulate in sufficient comfort. This action is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To perform this task, count about a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's look at how to replace this bulb, point by point.change-bulb-clock-Toyota-Camry-2

How to change the light bulb on the Toyota Camry 2 display

Depending on the year of release, the methodology may vary a little. It is conceivable that some covers or screws are not identical. So that's the general approach.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Toyota Camry 2. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension as well obviously.
  • Put in the new bulb making sure it sits well at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered particular concerns.