When the clock doesn't light up anymore, it can be annoying. It will therefore be necessary to replace the display bulb of the Toyota Camry 5. Although the dashboard remains functional, it lacks several information in order to circulate in sufficient comfort. This manipulation is not complex to carry out, but requires a minimum of meticulousness. We also advise you to take photos at certain stages in order to remember the reverse process, especially for connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, point by point.change-bulb-clock-Toyota-Camry-5

How to change the light bulb on the Toyota Camry 5 display

Depending on the release dates, the method may vary slightly. It is conceivable that some covers or screws are not identical. Here is therefore the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of the Toyota Camry 5. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered particular problems.