When the clock runs out of light, it can get annoying. It will therefore be necessary to replace the display bulb of this Toyota Camry. Although the dashboard remains operational, some information is missing to circulate in good conditions. This action is not hard to perform, but requires a minimum of rigor. It is also advisable to take photos at different stages to remember the reverse process, especially regarding connectors. To do this, count about a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Camry

How to change the bulb on the Toyota Camry display

Depending on the production dates, the procedure may vary a little. It is possible that several covers or screws are not identical. Here is therefore the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the cover is completely removed, you need disconnect connectors connected to the clock bulb of your Toyota Camry. You can thus dismantle all of the block's connectors, provided that you remember the location. Help yourself with your camera if needed.
  • You can normally access the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also of course.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

You can leave a comment if you have encountered particular malfunctions.