When the clock stops lighting up, it can be unpleasant. So you have to change the display bulb of this Toyota Corolla 5. Although the dashboard remains operational, it lacks a few indications to drive in sufficient comfort. This operation is not hard to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages to remember the reverse process, especially regarding connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the light bulb on the Toyota Corolla 5 display
Depending on the years of production, the method may vary slightly. It is conceivable that several covers or screws are not identical. Here is therefore the procedure to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of your Toyota Corolla 5. You will be able to disassemble all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- Normally you can have access to the defective bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also obviously.
- Place the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific concerns.