When the clock has no more light, it can be annoying. So you have to replace the display bulb Toyota Corolla 6. Although the dashboard is still functional, we are missing some information to drive in sufficient comfort. This manipulation is not difficult to achieve, but requires a minimum of rigor. It is also advisable to take pictures at different stages to remind you of the reverse process, especially for the connectors. To complete this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Corolla-6

How to change the light bulb on the Toyota Corolla 6 display

Depending on the production dates, the method may vary slightly. It is likely that some covers or screws are not identical. Here is the general procedure to follow.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove some screws. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, you need disconnect connectors that connect to the clock bulb of the Toyota Corolla 6. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • You can normally have access to the damaged bulb. Gently dismantle the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also naturally.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave a comment if you have encountered particular malfunctions.