When the clock runs out of light, it can be unpleasant. So you have to change the display bulb Toyota Corolla 7. Even if the dashboard remains operational, we lack several information to drive comfortably. This operation is not hard to execute, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remember the reverse process, especially for connectors. To carry out this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to change this bulb, point by point.change-bulb-clock-Toyota-Corolla-7

How to change the light bulb on the Toyota Corolla 7 display

Depending on the release year, the procedure may vary a little. It is conceivable that several covers or screws are not identical. This is the logic to follow in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, you will need disconnect connectors connected to the clock bulb of this Toyota Corolla 7. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can access the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage as well obviously.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered specific problems.