When the clock stops working, it can be unpleasant. So you have to change the display bulb of this Toyota Corolla 9 Ts. Although the dashboard remains operational, we lack some indications in order to circulate in sufficient comfort. This manipulation is not hard to perform, but requires a minimum of rigor. We also advise you to take photos at certain stages in order to remind you of the opposite approach, particularly concerning connectors. To carry out this operation, plan approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb, point by point.
How to change the bulb on the Toyota Corolla 9 Ts display
Depending on the years of production, the method may vary slightly. It is likely that some covers or screws are not identical. Here is the procedure to follow in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of the Toyota Corolla 9 Ts. You can thus dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension as well obviously.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Please do not hesitate to leave us a comment if you have encountered specific concerns.