When the clock doesn't light up, it can get annoying. It will therefore be necessary to change the display bulb of this Toyota Corolla 9. Although the dashboard is still functional, some information is missing in order to circulate in sufficient comfort. This manipulation is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at different stages in order to remember the reverse process, especially for the connectors. To carry out this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's look at how to change this bulb, step by step.
How to change the light bulb on the Toyota Corolla 9 display
Depending on the release dates, the methodology may vary a bit. It is conceivable that some covers or screws differ. This is the logic to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may have to remove several screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Toyota Corolla 9. You can consequently remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- Normally you can access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension as well, of course.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave a comment if you have encountered specific concerns.