When the clock stops lighting up, it can be annoying. So you have to change the display bulb of the Toyota Corolla Verso 2. Even if the dashboard is still operational, we are missing certain information in order to circulate in sufficient comfort. This operation is not complex to perform, but requires a minimum of thoroughness. It is also advisable to take pictures at certain stages in order to remind you of the reverse process, especially for the connectors. To complete this task, count roughly a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, point by point.change-bulb-clock-Toyota-Corolla-Verso-2

How to change the display bulb of the Toyota Corolla Verso 2

Depending on the year of circulation, the procedure may vary a little. It is likely that some covers or screws differ. So that's the logic to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. Sometimes you have to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of the Toyota Corolla Verso 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
  • Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension also obviously.
  • Place the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave us a comment if you have encountered specific concerns.