When the clock stops lighting up, it can be annoying. So you have to change the display bulb of the Toyota Corolla Verso. Even if the dashboard is still functional, there are some indications missing to circulate comfortably. This action is not complex to execute, but requires a minimum of rigor. It is also advisable to take photos at different stages to remind you of the opposite approach, especially for connectors. To carry out this operation, plan about a small half-hour . For tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Toyota Corolla Verso display
Depending on the release dates, the method may vary slightly. Some covers or screws may differ. Here is therefore the logic to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors that connect to the clock bulb of your Toyota Corolla Verso. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can access the broken bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also of course.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific malfunctions.