When the clock runs out of light, it can get annoying. So we will have to change the display bulb of this Toyota Crown. Even if the dashboard remains operational, certain information is missing to circulate in sufficient comfort. This manipulation is not complex to perform, but requires a minimum of rigor. It is also advisable to take photos at certain stages to remember the reverse process, especially for connectors. To execute this operation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb, point by point.change-bulb-clock-Toyota-Crown

How to change the bulb on the Toyota Crown display

Depending on the release year, the method may vary slightly. It is possible that some covers or screws are not identical. Here is the logic to follow in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade is completely removed, you must disconnect connectors connected to the Toyota Crown clock bulb. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally have access to the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also obviously.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

You can leave a comment if you have encountered particular malfunctions.