When the clock runs out of light, it can be annoying. So you have to replace the display bulb of this Toyota Cs & s. Even if the dashboard is still functional, some information is missing in order to circulate in sufficient comfort. This action is not hard to achieve, but requires a minimum of rigor. We advise you to take pictures at certain stages in order to remember the reverse manipulation, in particular concerning the connectors. To carry out this manipulation, allow approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.
How to change the display bulb of the Toyota Cs & s
Depending on the years of production, the methodology may vary slightly. It is still possible that several covers or screws differ. So that's the logic to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of the Toyota Cs & s. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage also naturally.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave us a comment if you have encountered specific malfunctions.