When the clock runs out of light, it can be annoying. So you have to change the display bulb of this Toyota Dyna. Even if the dashboard remains operational, certain indications are missing in order to circulate in good conditions. This manipulation is not complex to perform, but requires a minimum of rigor. We recommend that you take pictures at certain stages in order to remember the reverse process, especially for the connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb, step by step.
How to change the Toyota Dyna display bulb
Depending on the release year, the procedure may vary a little. It remains likely that some covers or screws differ. Here is therefore the procedure to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this situation, keep them carefully aside.
- Once the front is completely removed, you need disconnect connectors that connect to the clock bulb of your Toyota Dyna. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also obviously.
- Place the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific malfunctions.