When the clock stops lighting up, it can get annoying. So you have to replace the display bulb of the Toyota Es3. Although the dashboard remains operational, there are some indications missing to drive in sufficient comfort. This manipulation is not hard to perform, but requires a minimum of rigor. We advise you to take photos at different stages to remind you of the reverse approach, especially regarding connectors. To carry out this operation, plan approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Toyota-Es3

How to change the bulb on the Toyota Es3 display

Depending on the release dates, the method may vary a little. Some covers or screws may differ. So that's the general approach to follow.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. Therefore, keep them preciously aside.
  • Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of your Toyota Es3. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally access the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also naturally.
  • Place the new bulb making sure it sits well at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave us a comment if you have encountered particular malfunctions.