When the clock stops lighting up, it can get unpleasant. It will therefore be necessary to replace the display bulb of this Toyota Fine-n. Even if the dashboard remains functional, we are missing certain indications in order to drive in good conditions. This action is not hard to execute, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse process, especially for connectors. To carry out this operation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Toyota-Fine-n

How to change the bulb on the Toyota Fine-n display

Depending on the release dates, the procedure may vary a little. It is conceivable that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of the Toyota Fine-n. You can therefore remove all the connectors from the block, as long as you remember the location. Help yourself with your camera if needed.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage as well obviously.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered specific problems.