When the clock stops working, it can be unpleasant. It will therefore have to change the display bulb of this Toyota Fj Cruiser. Although the dashboard remains operational, we are missing several indications in order to circulate in sufficient comfort. This manipulation is not difficult to achieve, but requires a minimum of thoroughness. It is also advisable to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To carry out this task, plan around a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.
How to change the light bulb on the Toyota Fj Cruiser display
Depending on the release dates, the methodology may vary a little. It is likely that some covers or screws differ. So here is the logic to follow in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
- Once the facade has been completely removed, it will disconnect connectors connected to the clock bulb of this Toyota Fj Cruiser. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also of course.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific concerns.