When the clock is out of light, it can be annoying. It will therefore be necessary to replace the display bulb of this Toyota Ft-86 (2). Even if the dashboard remains functional, it lacks certain indications in order to circulate in good conditions. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages in order to remember the reverse process, especially concerning the connectors. To complete this task, count roughly a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to change this bulb, step by step.
How to change the display bulb of the Toyota Ft-86 (2)
Depending on the release dates, the method may vary a little. It is likely that several covers or screws are not identical. We thus offer you the logic to follow in general.
- Start with remove the covers of the front panel which impede access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove some screws. In this case, keep them carefully aside.
- Once the facade is completely removed, you will have to disconnect connectors connected to the clock bulb of your Toyota Ft-86 (2). You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage as well obviously.
- Put in the new bulb making sure it sits well at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
You can leave a comment if you have encountered specific malfunctions.