When the clock stops working, it can be annoying. So you have to replace the display bulb of the Toyota Ft-86. Even if the dashboard remains operational, we lack several information to circulate in sufficient comfort. This manipulation is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially for connectors. To carry out this task, plan around a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to change this bulb, step by step.change-bulb-clock-Toyota-Ft-86

How to change the light bulb on the Toyota Ft-86 display

Depending on the year of discharge, the procedure may vary a little. It is conceivable that some covers or screws differ. Here is therefore the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Toyota Ft-86. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can access the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered particular concerns.