When the clock doesn't light up anymore, it can be annoying. So you have to replace the display bulb of this Toyota Ft-hs. Although the dashboard remains operational, we are missing some information in order to circulate in sufficient comfort. This operation is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages in order to remember the reverse process, especially for connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to replace this bulb, step by step.change-bulb-clock-Toyota-Ft-hs

How to change the light bulb on the Toyota Ft-hs display

Depending on the year of discharge, the procedure may vary a little. It is conceivable that some covers or screws differ. We therefore suggest the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of the Toyota Ft-hs. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage also obviously.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered specific concerns.