When the clock stops lighting up, it can get annoying. We will therefore have to replace the display bulb of this Toyota Fun Cruiser. Although the dashboard remains functional, it lacks some information to drive in sufficient comfort. This operation is not hard to execute, but requires a minimum of thoroughness. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb, point by point.
How to change the light bulb on the Toyota Fun Cruiser display
Depending on the years of production, the procedure may vary slightly. It is likely that several covers or screws are not identical. Here is the procedure to follow in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors that connect to the clock bulb of the Toyota Fun Cruiser. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the defective bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage also obviously.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave us a comment if you have encountered particular concerns.