When the clock stops working, it can be annoying. So you have to replace the display bulb of the Toyota Fxs. Even if the dashboard is still functional, it lacks several information to circulate comfortably. This operation is not difficult to execute, but requires a minimum of rigor. It is also advisable to take photos at different stages to remember the reverse manipulation, especially for the connectors. To carry out this operation, plan about a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Toyota-Fxs

How to change the light bulb on the Toyota Fxs display

Depending on the production dates, the methodology may vary slightly. Some covers or screws may differ. This is therefore the logic to be followed in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Toyota Fxs. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also of course.
  • Put in the new bulb making sure it sits well at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Please do not hesitate to leave us a comment if you have encountered specific concerns.