When the clock runs out of light, it can get unpleasant. We will therefore have to replace the display bulb of the Toyota Gt86. Even if the dashboard is still operational, we are missing some information to drive comfortably. This action is not hard to execute, but requires a minimum of thoroughness. We advise you to take photos at certain stages in order to remember the reverse process, especially regarding connectors. To perform this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to change this bulb, step by step.change-bulb-clock-Toyota-Gt86

How to change the light bulb on the Toyota Gt86 display

Depending on the release dates, the method may vary slightly. It is possible that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this situation, keep them preciously aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of your Toyota Gt86. You can thus dismantle all of the block's connectors, provided that you remember the location. Help yourself with your camera if needed.
  • Normally you can access the defective bulb. Gently dismantle the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also obviously.
  • Place the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered specific malfunctions.