When the clock stops lighting up, it can get unpleasant. So you have to change the display bulb of the Toyota Hi Ace. Although the dashboard remains operational, it lacks several indications to circulate in sufficient comfort. This operation is not complex to perform, but requires a minimum of rigor. We advise you to take photos at certain stages to remind you of the reverse process, especially for connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Hi-Ace

How to change the light bulb on the Toyota Hi Ace display

Depending on the years of production, the procedure may vary a little. It is likely that some covers or screws are not identical. Here is the procedure to follow in general.

  • Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
  • Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of your Toyota Hi Ace. You will therefore be able to dismantle all of the block's connectors, provided that you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also naturally.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered specific concerns.