When the clock stops working, it can get annoying. So we have to change the display bulb Toyota Highlander 2. Even if the dashboard remains functional, it lacks certain indications for driving in good conditions. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages to remember the reverse process, especially for the connectors. To carry out this manipulation, count about a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.
How to change the display bulb of the Toyota Highlander 2
Depending on the production dates, the methodology may vary a bit. It is possible that some covers or screws differ. This is the logic to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Toyota Highlander 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if needed.
- Normally you can have access to the defective bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension too of course.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered particular malfunctions.