When the clock has no more light, it can become annoying. So you have to change the display bulb of this Toyota Highlander. Even if the dashboard is still functional, several pieces of information are missing in order to circulate in good conditions. This operation is not complex to perform, but requires a minimum of rigor. It is also advisable to take pictures at certain stages in order to remind you of the reverse process, especially for the connectors. To carry out this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.
How to change the display bulb of the Toyota Highlander
Depending on the years of production, the methodology may vary a little. It is likely that some covers or screws differ. So that's the logic to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this situation, keep them carefully aside.
- Once the facade is completely dismantled, you must disconnect connectors connected to the clock bulb of the Toyota Highlander. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- Normally you can access the damaged bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage as well of course.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered particular concerns.