When the clock stops working, it can be annoying. So you have to change the display bulb of this Toyota Hilux 2. Although the dashboard remains functional, it lacks several indications for driving comfortably. This operation is not complex to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages to remind you of the reverse manipulation, especially concerning the connectors. To perform this task, allow about a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb, point by point.
How to change the bulb on the Toyota Hilux 2 display
Depending on the release year, the procedure may vary a little. It is likely that some covers or screws differ. Here is therefore the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the facade has been completely removed, you will need disconnect connectors connected to the clock bulb of your Toyota Hilux 2. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- Normally you can have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage as well obviously.
- Place the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered specific malfunctions.