When the clock stops lighting up, it can be annoying. So you have to replace the display bulb of this Toyota Hilux 3. Even if the dashboard is still functional, it lacks some indications in order to circulate in sufficient comfort. This manipulation is not complex to perform, but requires a minimum of rigor. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially regarding connectors. To carry out this operation, plan about a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.
How to change the bulb on the Toyota Hilux 3 display
Depending on the production dates, the methodology may vary a little. It is possible that some covers or screws are not identical. Here is the procedure to follow in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Toyota Hilux 3. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave us a comment if you have encountered any particular problems.