When the clock stops working, it can get annoying. So we will have to change the display bulb of this Toyota Hilux 4. Even if the dashboard remains operational, it lacks some information to drive in sufficient comfort. This manipulation is not difficult to execute, but requires a minimum of rigor. We also advise you to take photos at different stages to remember the reverse manipulation, especially for connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's look at how to change this bulb, step by step.
How to change the bulb on the Toyota Hilux 4 display
Depending on the production dates, the methodology may vary a little. It is likely that several covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Toyota Hilux 4. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can access the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also obviously.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered particular concerns.