When the clock has no more light, it can become annoying. So you have to change the display bulb of the Toyota Hilux. Although the dashboard remains functional, we are missing several indications to drive in good conditions. This operation is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages to remember the reverse process, especially for connectors. To carry out this task, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the Toyota Hilux display
Depending on the production dates, the procedure may vary slightly. It is likely that some covers or screws are not identical. We therefore propose the logic to be followed in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Toyota Hilux. You can therefore dismantle all of the block's connectors, provided that you remember the location. Help yourself by taking photos if necessary.
- You can normally access the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also of course.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave a comment if you have encountered particular malfunctions.