When the clock stops lighting up, it can get annoying. So you have to change the display bulb of the Toyota Iq. Even if the dashboard is still operational, some information is missing in order to drive comfortably. This manipulation is not difficult to execute, but requires a minimum of meticulousness. We advise you to take photos at different stages to remind you of the reverse manipulation, especially for connectors. To carry out this operation, plan about a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to replace this bulb, point by point.change-bulb-clock-Toyota-Iq

How to change the bulb on the Toyota Iq display

Depending on the year of circulation, the procedure may vary slightly. It remains possible that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
  • Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of your Toyota Iq. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also obviously.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered particular problems.