When the clock stops working, it can be annoying. It will therefore have to change the display bulb of the Toyota Land Cruiser Serie 120. Even if the dashboard is still operational, we are missing some indications in order to circulate comfortably. This manipulation is not difficult to achieve, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages in order to remind you of the opposite approach, especially for connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to change this bulb, point by point.
How to change the bulb on the display of the Toyota Land Cruiser Serie 120
Depending on the release dates, the procedure may vary slightly. It is possible that some covers or screws are not identical. Here is the procedure to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. Sometimes you have to remove a few screws. In this situation, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors connected to the clock bulb of your Toyota Land Cruiser Serie 120. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension as well obviously.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered specific malfunctions.