When the clock stops lighting up, it can get annoying. It will therefore have to change the display bulb of this Toyota Land Cruiser Serie 40. Even if the dashboard remains operational, it lacks certain indications to circulate in good conditions. This operation is not hard to execute, but requires a minimum of rigor. We also advise you to take photos at different stages to remind you of the reverse approach, especially regarding connectors. To complete this task, count about a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Toyota-Land-Cruiser-Serie-40

How to change the bulb on the display of the Toyota Land Cruiser Serie 40

Depending on the years of circulation, the methodology may vary slightly. Several covers or screws may differ. This is the general approach to follow.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. Therefore, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this Toyota Land Cruiser Serie 40. You will be able to dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension as well, of course.
  • Place the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave us a comment if you have encountered specific concerns.